Bookings through this site are not open yet; it is looking for a local Torrance installer to work with. You can check typical prices below and ask to be notified.

Garage Slatwall in Torrance

Garage Cabinets Coast Torrance covers garage slatwall in Torrance — PVC panels, steel rail systems and pegboard compared, how hooks and bike mounts attach, and what each wall system typically costs installed.

Schematic icon: Garage Slatwall
See typical prices Typically from $28
(424) 306-0330 Voicemail

Bookings aren't open yet. Leave your name and number; your message is recorded, and you'll get one message when a local installer is available.

Illustration: a Torrance garage wall covered in white PVC slatwall panels with bikes, garden tools and a helmet hanging from hooks, a workbench below Illustration

Three ways to cover a wall

System How it works Good at Watch for
PVC slatwall Panels with grooves that take hooks and bins Damp air; wipes clean Heavy loads on a long span; sun on pale panels
Steel rail system Horizontal rails fastened to studs Heavy tools, bikes, ladders Costs more; hooks are system-specific
Pegboard Perforated hardboard on strips Cheap, easy to add Swells in damp air; hooks pop out

Slatwall covers a wall, a rail takes more weight on fewer points. Many garages use slatwall above the bench and rails by the door.

What a wall can carry

Each hook, bracket and bin has a load rating from its maker, and a panel or rail is only as strong as the screws that hold it into studs. A single bike hook carries a bike; a dozen hooks on one panel carry more than the panel is rated for. The maker's data for the panel and the hardware decide, not the photo on the box.

Hooks, bins and bikes

The most common loads are bikes, ladders, garden tools, helmets, a hose reel and bins of small parts. Bike mounts take the bike by the wheel or the frame; a ladder rests on two wide hooks; a bin hangs on a lip. Plan the hooks around the cars' door swing so nothing sticks out where a door opens.

What wall storage typically costs in Torrance

For 16 linear feet of wall, installed, the calculator gives the numbers below. A hooks and bikes package adds about $6–$18 per foot.

System Per linear ft 16 linear ft With hooks package
PVC slatwall $28–$65 $448–$1,040 $544–$1,328
Steel rail system $50–$120 $800–$1,920 $896–$2,208

Overhead racks, a lift and a ceiling check are separate lines. Market estimates, not quotes.

Garage Slatwall — common questions

Is slatwall better than pegboard in a damp garage?

PVC slatwall does not take up water, while hardboard pegboard can swell in damp air. Both hold hooks; slatwall holds more when the hardware is rated for it.

Can slatwall hold a bike?

Yes, with hooks or a bike mount rated for the weight, and with the panel fastened into studs. The maker's rating for the mount and the panel decides.

Garage Slatwall: check availability and price range

Bookings aren't open yet — a typical Torrance range in about 30 seconds.

Step 1 Range —
    What is the project?

    Cabinets for the walls, racks and wall storage, or storage for a shop or business.

    How long is the wall run?

    Typical: one full wall of a two-car garage, about 20 linear feet.

    Add up the wall lengths you want covered, in feet; corners count once.

    Which kind of cabinets?

    Typical: powder-coated steel; damp coastal air is easier on it than on raw particleboard.

    Which cabinet heights?

    Typical: base and wall cabinets. Tall cabinets add the most and are anchored to studs.

    Anything extra? optional

    Skip if none apply; a bench, a rack and lighting are the usual extras.

    How many feet of wall or rack?

    Typical: 16 feet of wall, about a car's length and a half.

    Which kind of storage?

    Typical: PVC slatwall, which does not swell in damp air.

    Add hooks?

    One choice; hooks priced per foot of wall.

    Anything extra? optional

    Racks are priced each; the ceiling is checked before any rack is planned.

    What kind of space is it?

    Pick the space that holds the most tools or parts.

    How long is the wall run?

    Typical: two walls, about 40 linear feet.

    Which kind of storage system?

    Typical: heavy-gauge steel cabinets.

    Tops and anchoring? pick all that apply

    Pick every line that fits.

    When could the work happen? optional

    Typical: after hours or on a weekend. No price change.

    Anything extra? optional

    Skip if none apply.

    Notes and photos optional

    Optional: a short note, such as a low ceiling, the panel or the water heater.

    Additional files (optional) If you like, attach any file related to your request. Nothing is required. Please avoid photos of people, especially children, and documents with personal or financial details. Location data is removed from photos when they are received. Bookings through this site are not open yet, so no one reviews or prices these files. Up to 5 files, 10 MB each: photos (JPEG, PNG or WebP) or PDF.
      Your range

      A ZIP code is enough; email and phone are optional.

      • Pick the project, its length of wall and a type to see the range.

      Typical Torrance range—

      One message when bookings open

      Bookings through this site are not open yet. No installer will contact you. Your details are used only for the price range and, if you leave an email, one availability message.

      This site is operated by Liberty Horns LLC and is not a contractor. Price ranges are market estimates, not quotes. Privacy Policy.

      Typical Torrance area garage cabinet prices, foot by foot

      Pick the job, the length of wall and the details, and see the range. No contact details needed. Bookings open here once a local installer is named on this site.

      (424) 306-0330 Voicemail

      Bookings aren't open yet. Leave your name and number; your message is recorded, and you'll get one message when a local installer is available.

      Voicemail (424) 306-0330
      Enlarged photo